PureFlow R4SBD361 Raptor 4G 150 GPH Fuel Pump 03-04.5 Dodge 5.9L Cummins With In-Tank Fuel Pump
The factory block mounted lift pumps found on the 2003-2004.5 Cummins have proven themselves as being nothing better than a temporary Band-Aid. Further, as the lift pumps failed, it would cause premature failure of the injection pump, a very expensive repair. While Dodge began retrofitting fuel pumps from the block to inside of the fuel tank, it has been shown that this conversion is better than the original units, but still not adequate, especially for those that have made any performance upgrades whatsoever.
This pump kit will deliver 150 gallons per hour (GPH) of fuel, enough to support 500 to 800 rear wheel horsepower. Are you ready to supply your Cummins' with adequate fueling to ensure fuel delivery is never an issue again?
IMPORTANT INFORMATION REGARDING IN-TANK FUEL PUMP
This specific Raptor unit is designed for trucks that have been retrofitted from the original block mounted pump to a factory style in-tank fuel pump. For those unaware, all of the 1998.5-2004.5 Cummins powered Rams came from the factory with a block mounted lift pump. However, if it ever failed and had it replaced previously, it very likely was retrofitted to the newer design that actually placed the pump in the fuel tank. If you're not sure where your pump is located, simply "bump" the key, which will engage the pump, then listen whether the hum from the pump is coming from the engine compartment or the fuel tank.
This pump kit will deliver 150 gallons per hour (GPH) of fuel, enough to support 500 to 800 rear wheel horsepower. Are you ready to supply your Cummins' with adequate fueling to ensure fuel delivery is never an issue again?
IMPORTANT INFORMATION REGARDING IN-TANK FUEL PUMP
This specific Raptor unit is designed for trucks that have been retrofitted from the original block mounted pump to a factory style in-tank fuel pump. For those unaware, all of the 1998.5-2004.5 Cummins powered Rams came from the factory with a block mounted lift pump. However, if it ever failed and had it replaced previously, it very likely was retrofitted to the newer design that actually placed the pump in the fuel tank. If you're not sure where your pump is located, simply "bump" the key, which will engage the pump, then listen whether the hum from the pump is coming from the engine compartment or the fuel tank.
The factory block mounted lift pumps found on the 2003-2004.5 Cummins have proven themselves as being nothing better than a temporary Band-Aid. Further, as the lift pumps failed, it would cause premature failure of the injection pump, a very expensive repair. While Dodge began retrofitting fuel pumps from the block to inside of the fuel tank, it has been shown that this conversion is better than the original units, but still not adequate, especially for those that have made any performance upgrades whatsoever.
This pump kit will deliver 150 gallons per hour (GPH) of fuel, enough to support 500 to 800 rear wheel horsepower. Are you ready to supply your Cummins' with adequate fueling to ensure fuel delivery is never an issue again?
IMPORTANT INFORMATION REGARDING IN-TANK FUEL PUMP
This specific Raptor unit is designed for trucks that have been retrofitted from the original block mounted pump to a factory style in-tank fuel pump. For those unaware, all of the 1998.5-2004.5 Cummins powered Rams came from the factory with a block mounted lift pump. However, if it ever failed and had it replaced previously, it very likely was retrofitted to the newer design that actually placed the pump in the fuel tank. If you're not sure where your pump is located, simply "bump" the key, which will engage the pump, then listen whether the hum from the pump is coming from the engine compartment or the fuel tank.
This pump kit will deliver 150 gallons per hour (GPH) of fuel, enough to support 500 to 800 rear wheel horsepower. Are you ready to supply your Cummins' with adequate fueling to ensure fuel delivery is never an issue again?
IMPORTANT INFORMATION REGARDING IN-TANK FUEL PUMP
This specific Raptor unit is designed for trucks that have been retrofitted from the original block mounted pump to a factory style in-tank fuel pump. For those unaware, all of the 1998.5-2004.5 Cummins powered Rams came from the factory with a block mounted lift pump. However, if it ever failed and had it replaced previously, it very likely was retrofitted to the newer design that actually placed the pump in the fuel tank. If you're not sure where your pump is located, simply "bump" the key, which will engage the pump, then listen whether the hum from the pump is coming from the engine compartment or the fuel tank.
$135.90
Original: $453.00
-70%PureFlow R4SBD361 Raptor 4G 150 GPH Fuel Pump 03-04.5 Dodge 5.9L Cummins With In-Tank Fuel Pump—
$453.00
$135.90Description
The factory block mounted lift pumps found on the 2003-2004.5 Cummins have proven themselves as being nothing better than a temporary Band-Aid. Further, as the lift pumps failed, it would cause premature failure of the injection pump, a very expensive repair. While Dodge began retrofitting fuel pumps from the block to inside of the fuel tank, it has been shown that this conversion is better than the original units, but still not adequate, especially for those that have made any performance upgrades whatsoever.
This pump kit will deliver 150 gallons per hour (GPH) of fuel, enough to support 500 to 800 rear wheel horsepower. Are you ready to supply your Cummins' with adequate fueling to ensure fuel delivery is never an issue again?
IMPORTANT INFORMATION REGARDING IN-TANK FUEL PUMP
This specific Raptor unit is designed for trucks that have been retrofitted from the original block mounted pump to a factory style in-tank fuel pump. For those unaware, all of the 1998.5-2004.5 Cummins powered Rams came from the factory with a block mounted lift pump. However, if it ever failed and had it replaced previously, it very likely was retrofitted to the newer design that actually placed the pump in the fuel tank. If you're not sure where your pump is located, simply "bump" the key, which will engage the pump, then listen whether the hum from the pump is coming from the engine compartment or the fuel tank.
This pump kit will deliver 150 gallons per hour (GPH) of fuel, enough to support 500 to 800 rear wheel horsepower. Are you ready to supply your Cummins' with adequate fueling to ensure fuel delivery is never an issue again?
IMPORTANT INFORMATION REGARDING IN-TANK FUEL PUMP
This specific Raptor unit is designed for trucks that have been retrofitted from the original block mounted pump to a factory style in-tank fuel pump. For those unaware, all of the 1998.5-2004.5 Cummins powered Rams came from the factory with a block mounted lift pump. However, if it ever failed and had it replaced previously, it very likely was retrofitted to the newer design that actually placed the pump in the fuel tank. If you're not sure where your pump is located, simply "bump" the key, which will engage the pump, then listen whether the hum from the pump is coming from the engine compartment or the fuel tank.
