1 / 8
+3
S&B Cold Air Intake System 10-12 Dodge 6.7L Cummins 75-5092
S&B Filters diesel performance intake kits are all about improving airflow to your truck's engine. The S&B 75-5092 flows 51.68% better than the OE Induction System while removing 99.50% of the airborne dirt at the Vehicle's Rated Flow. Better airflow translates into a noticeable increase in power, acceleration, fuel economy, and most importantly...bragging rights. It's just a matter of superior design.
WHY CHOOSE S&B? LET US COUNT THE REASONS:
Breathe easy. Your engine and warranty are protected.
But do you want a disposable filter? This question really comes down to the end user. Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the filter or clean it.
It all starts with airflow. The more air that your engine breathes, the more oxygen it receives. More oxygen results in a better combustion. Better combustion translates into more power and better fuel economy. This is why your vehicle runs better on cool mornings than on hot afternoons as cool air is denser and contains more oxygen. You can feed your engine more oxygen by reducing the restriction of the airflow.
S&B Thorough Research Development
During our ISO 5011 testing, we first measure the restriction of the airflow through your vehicle's original induction system in order to establish a baseline. The goal of a Performance Intake Kit is to reduce the restriction of the airflow to your vehicle's engine. In layman's terms, we want to make it easier for the engine to breathe. By reducing the restriction of the airflow, your engine will have better throttle response and produce more horsepower and torque. Since your engine will not have to work as hard to produce the required amount of power - the result is better fuel economy.
S&B Backs It Up: Certified Test Results
S&B provides ISO 5011 Certified Test Results for its intake kits, so you can see exactly how much the airflow was improved (restriction decreased) as well as the efficiency of the filter. ISO is a worldwide federation of national standards bodies. The work of preparing International Standards is normally carried out through ISO technical committees. The specific individual International Standard utilized by S&B and automotive manufacturers establishes and specifies uniform test procedures, conditions, equipment, and a performance report to permit the direct laboratory performance comparison of air cleaners, in this case, those used on internal combustion engines and compressors used in automotive and industrial applications.
WHY CHOOSE S&B? LET US COUNT THE REASONS:
Breathe easy. Your engine and warranty are protected.
- Add power and fun while still protecting your investment.
- The secondary inlet lowers the restriction level, resulting in better performance.
- Silicone is a premium rubber that can withstand temperatures up to 400 degrees Fahrenheit and won't crack or tear with age. It's tough, yet elastic enough to stretch, then snap into a perfect seal.
- S&B's one piece air box design features an integrated box seal that keeps out unwanted engine heat. The cooler the air, the greater the density, resulting in better performance.
- The 75-5092 intake provides amazing airflow, solid protection, and looks great installed on your Cummins.
But do you want a disposable filter? This question really comes down to the end user. Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the filter or clean it.
- Always wanted a filter you could just throw away without sacrificing performance? S&B has just the filter for you!
- Comparable Airflow to our Cotton Filters with the same Great Protection.
- Last for 15,000 miles of highway driving. Extend the life of the filter using compressed air.
It all starts with airflow. The more air that your engine breathes, the more oxygen it receives. More oxygen results in a better combustion. Better combustion translates into more power and better fuel economy. This is why your vehicle runs better on cool mornings than on hot afternoons as cool air is denser and contains more oxygen. You can feed your engine more oxygen by reducing the restriction of the airflow.
S&B Thorough Research Development
During our ISO 5011 testing, we first measure the restriction of the airflow through your vehicle's original induction system in order to establish a baseline. The goal of a Performance Intake Kit is to reduce the restriction of the airflow to your vehicle's engine. In layman's terms, we want to make it easier for the engine to breathe. By reducing the restriction of the airflow, your engine will have better throttle response and produce more horsepower and torque. Since your engine will not have to work as hard to produce the required amount of power - the result is better fuel economy.
S&B Backs It Up: Certified Test Results
S&B provides ISO 5011 Certified Test Results for its intake kits, so you can see exactly how much the airflow was improved (restriction decreased) as well as the efficiency of the filter. ISO is a worldwide federation of national standards bodies. The work of preparing International Standards is normally carried out through ISO technical committees. The specific individual International Standard utilized by S&B and automotive manufacturers establishes and specifies uniform test procedures, conditions, equipment, and a performance report to permit the direct laboratory performance comparison of air cleaners, in this case, those used on internal combustion engines and compressors used in automotive and industrial applications.
S&B Filters diesel performance intake kits are all about improving airflow to your truck's engine. The S&B 75-5092 flows 51.68% better than the OE Induction System while removing 99.50% of the airborne dirt at the Vehicle's Rated Flow. Better airflow translates into a noticeable increase in power, acceleration, fuel economy, and most importantly...bragging rights. It's just a matter of superior design.
WHY CHOOSE S&B? LET US COUNT THE REASONS:
Breathe easy. Your engine and warranty are protected.
But do you want a disposable filter? This question really comes down to the end user. Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the filter or clean it.
It all starts with airflow. The more air that your engine breathes, the more oxygen it receives. More oxygen results in a better combustion. Better combustion translates into more power and better fuel economy. This is why your vehicle runs better on cool mornings than on hot afternoons as cool air is denser and contains more oxygen. You can feed your engine more oxygen by reducing the restriction of the airflow.
S&B Thorough Research Development
During our ISO 5011 testing, we first measure the restriction of the airflow through your vehicle's original induction system in order to establish a baseline. The goal of a Performance Intake Kit is to reduce the restriction of the airflow to your vehicle's engine. In layman's terms, we want to make it easier for the engine to breathe. By reducing the restriction of the airflow, your engine will have better throttle response and produce more horsepower and torque. Since your engine will not have to work as hard to produce the required amount of power - the result is better fuel economy.
S&B Backs It Up: Certified Test Results
S&B provides ISO 5011 Certified Test Results for its intake kits, so you can see exactly how much the airflow was improved (restriction decreased) as well as the efficiency of the filter. ISO is a worldwide federation of national standards bodies. The work of preparing International Standards is normally carried out through ISO technical committees. The specific individual International Standard utilized by S&B and automotive manufacturers establishes and specifies uniform test procedures, conditions, equipment, and a performance report to permit the direct laboratory performance comparison of air cleaners, in this case, those used on internal combustion engines and compressors used in automotive and industrial applications.
WHY CHOOSE S&B? LET US COUNT THE REASONS:
Breathe easy. Your engine and warranty are protected.
- Add power and fun while still protecting your investment.
- The secondary inlet lowers the restriction level, resulting in better performance.
- Silicone is a premium rubber that can withstand temperatures up to 400 degrees Fahrenheit and won't crack or tear with age. It's tough, yet elastic enough to stretch, then snap into a perfect seal.
- S&B's one piece air box design features an integrated box seal that keeps out unwanted engine heat. The cooler the air, the greater the density, resulting in better performance.
- The 75-5092 intake provides amazing airflow, solid protection, and looks great installed on your Cummins.
But do you want a disposable filter? This question really comes down to the end user. Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the filter or clean it.
- Always wanted a filter you could just throw away without sacrificing performance? S&B has just the filter for you!
- Comparable Airflow to our Cotton Filters with the same Great Protection.
- Last for 15,000 miles of highway driving. Extend the life of the filter using compressed air.
It all starts with airflow. The more air that your engine breathes, the more oxygen it receives. More oxygen results in a better combustion. Better combustion translates into more power and better fuel economy. This is why your vehicle runs better on cool mornings than on hot afternoons as cool air is denser and contains more oxygen. You can feed your engine more oxygen by reducing the restriction of the airflow.
S&B Thorough Research Development
During our ISO 5011 testing, we first measure the restriction of the airflow through your vehicle's original induction system in order to establish a baseline. The goal of a Performance Intake Kit is to reduce the restriction of the airflow to your vehicle's engine. In layman's terms, we want to make it easier for the engine to breathe. By reducing the restriction of the airflow, your engine will have better throttle response and produce more horsepower and torque. Since your engine will not have to work as hard to produce the required amount of power - the result is better fuel economy.
S&B Backs It Up: Certified Test Results
S&B provides ISO 5011 Certified Test Results for its intake kits, so you can see exactly how much the airflow was improved (restriction decreased) as well as the efficiency of the filter. ISO is a worldwide federation of national standards bodies. The work of preparing International Standards is normally carried out through ISO technical committees. The specific individual International Standard utilized by S&B and automotive manufacturers establishes and specifies uniform test procedures, conditions, equipment, and a performance report to permit the direct laboratory performance comparison of air cleaners, in this case, those used on internal combustion engines and compressors used in automotive and industrial applications.
Select Filter Options
From $113.70
Original: $379.00
-70%S&B Cold Air Intake System 10-12 Dodge 6.7L Cummins 75-5092—
$379.00
$113.70Description
S&B Filters diesel performance intake kits are all about improving airflow to your truck's engine. The S&B 75-5092 flows 51.68% better than the OE Induction System while removing 99.50% of the airborne dirt at the Vehicle's Rated Flow. Better airflow translates into a noticeable increase in power, acceleration, fuel economy, and most importantly...bragging rights. It's just a matter of superior design.
WHY CHOOSE S&B? LET US COUNT THE REASONS:
Breathe easy. Your engine and warranty are protected.
But do you want a disposable filter? This question really comes down to the end user. Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the filter or clean it.
It all starts with airflow. The more air that your engine breathes, the more oxygen it receives. More oxygen results in a better combustion. Better combustion translates into more power and better fuel economy. This is why your vehicle runs better on cool mornings than on hot afternoons as cool air is denser and contains more oxygen. You can feed your engine more oxygen by reducing the restriction of the airflow.
S&B Thorough Research Development
During our ISO 5011 testing, we first measure the restriction of the airflow through your vehicle's original induction system in order to establish a baseline. The goal of a Performance Intake Kit is to reduce the restriction of the airflow to your vehicle's engine. In layman's terms, we want to make it easier for the engine to breathe. By reducing the restriction of the airflow, your engine will have better throttle response and produce more horsepower and torque. Since your engine will not have to work as hard to produce the required amount of power - the result is better fuel economy.
S&B Backs It Up: Certified Test Results
S&B provides ISO 5011 Certified Test Results for its intake kits, so you can see exactly how much the airflow was improved (restriction decreased) as well as the efficiency of the filter. ISO is a worldwide federation of national standards bodies. The work of preparing International Standards is normally carried out through ISO technical committees. The specific individual International Standard utilized by S&B and automotive manufacturers establishes and specifies uniform test procedures, conditions, equipment, and a performance report to permit the direct laboratory performance comparison of air cleaners, in this case, those used on internal combustion engines and compressors used in automotive and industrial applications.
WHY CHOOSE S&B? LET US COUNT THE REASONS:
Breathe easy. Your engine and warranty are protected.
- Add power and fun while still protecting your investment.
- The secondary inlet lowers the restriction level, resulting in better performance.
- Silicone is a premium rubber that can withstand temperatures up to 400 degrees Fahrenheit and won't crack or tear with age. It's tough, yet elastic enough to stretch, then snap into a perfect seal.
- S&B's one piece air box design features an integrated box seal that keeps out unwanted engine heat. The cooler the air, the greater the density, resulting in better performance.
- The 75-5092 intake provides amazing airflow, solid protection, and looks great installed on your Cummins.
But do you want a disposable filter? This question really comes down to the end user. Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the filter or clean it.
- Always wanted a filter you could just throw away without sacrificing performance? S&B has just the filter for you!
- Comparable Airflow to our Cotton Filters with the same Great Protection.
- Last for 15,000 miles of highway driving. Extend the life of the filter using compressed air.
It all starts with airflow. The more air that your engine breathes, the more oxygen it receives. More oxygen results in a better combustion. Better combustion translates into more power and better fuel economy. This is why your vehicle runs better on cool mornings than on hot afternoons as cool air is denser and contains more oxygen. You can feed your engine more oxygen by reducing the restriction of the airflow.
S&B Thorough Research Development
During our ISO 5011 testing, we first measure the restriction of the airflow through your vehicle's original induction system in order to establish a baseline. The goal of a Performance Intake Kit is to reduce the restriction of the airflow to your vehicle's engine. In layman's terms, we want to make it easier for the engine to breathe. By reducing the restriction of the airflow, your engine will have better throttle response and produce more horsepower and torque. Since your engine will not have to work as hard to produce the required amount of power - the result is better fuel economy.
S&B Backs It Up: Certified Test Results
S&B provides ISO 5011 Certified Test Results for its intake kits, so you can see exactly how much the airflow was improved (restriction decreased) as well as the efficiency of the filter. ISO is a worldwide federation of national standards bodies. The work of preparing International Standards is normally carried out through ISO technical committees. The specific individual International Standard utilized by S&B and automotive manufacturers establishes and specifies uniform test procedures, conditions, equipment, and a performance report to permit the direct laboratory performance comparison of air cleaners, in this case, those used on internal combustion engines and compressors used in automotive and industrial applications.
