Tapped Banjo Bolt 98.5-12 5.9L/6.7L Cummins
These stainless steel Banjo Fittings feature a large diameter (.187 vs. .130) fuel port. The fittings are SAE (3/4 hex) vs. the stock 17mm hex design. The fitting on the bottom is the standard fitting, while the fitting on top has a built-up hex that is drilled to accept a 1/8 NPT male threaded fuel pressure sensor. Comes with two Cummins sealing washers. On 98.5-02 trucks equipped with the Bosch VP44 injection pump and 03-07 equipped with the Bosch CP3 injection pump this bolt replaces the banjo bolt on the fuel supply line. On 07.5-12 6.7L trucks equipped with the Bosch CP3 you will use it to replace the banjo fitting at the back of the stock fuel filter housing to get fuel pressure.
These stainless steel Banjo Fittings feature a large diameter (.187 vs. .130) fuel port. The fittings are SAE (3/4 hex) vs. the stock 17mm hex design. The fitting on the bottom is the standard fitting, while the fitting on top has a built-up hex that is drilled to accept a 1/8 NPT male threaded fuel pressure sensor. Comes with two Cummins sealing washers. On 98.5-02 trucks equipped with the Bosch VP44 injection pump and 03-07 equipped with the Bosch CP3 injection pump this bolt replaces the banjo bolt on the fuel supply line. On 07.5-12 6.7L trucks equipped with the Bosch CP3 you will use it to replace the banjo fitting at the back of the stock fuel filter housing to get fuel pressure.
Original: $15.00
-70%$15.00
$4.50Description
These stainless steel Banjo Fittings feature a large diameter (.187 vs. .130) fuel port. The fittings are SAE (3/4 hex) vs. the stock 17mm hex design. The fitting on the bottom is the standard fitting, while the fitting on top has a built-up hex that is drilled to accept a 1/8 NPT male threaded fuel pressure sensor. Comes with two Cummins sealing washers. On 98.5-02 trucks equipped with the Bosch VP44 injection pump and 03-07 equipped with the Bosch CP3 injection pump this bolt replaces the banjo bolt on the fuel supply line. On 07.5-12 6.7L trucks equipped with the Bosch CP3 you will use it to replace the banjo fitting at the back of the stock fuel filter housing to get fuel pressure.
